The BSA 2022 Annual Convention will be held April 30 - May 3 at the Hyatt Regency Indian Wells Resort & Spa in Indian Wells, CA. BSA’s Convention Planning Committee encourages all BSA members and participating manufacturers to begin "Towering Towards Tomorrow" and take this opportunity to lead our industry into a bright future. The 2022 Business program focuses on how you, your company, and the association will prepare for the future of the bearing industry.
Don't miss this forward-thinking event to reconnect with your essential relationships and be part of bringing BSA into the future!
Plan now to join us and take advantage of the only annual networking program attended by the highest-level executives from the bearing industry.
This year's program will include:
Register today for the BSA 2022 Convention!
Not ready to register? Click here
Jeff and Kayce Cloud, BSA 2022 Convention Chairman, IBT, Inc.
Mitch and Tasha Bouchard, General Bearing Service, Inc.
Todd and Amanda Hamlin, DXP Enterprises, Inc.
Brian and Christie Negri, Jamaica Bearings Company, Inc.
Jason and Tia Vasquez, Applied Industrial Technologies
Chris Curran and Suzanne Davis, Climax Metal Products Compnay
BSA is the forum to promote networking and knowledge-sharing and the sale of bearings through authorized distributors. BSA is the international service and educational organization of almost 100 companies distributing factory-warranted ball, roller, and anti-friction bearings and invited manufacturers of bearings and related products. BSA is made up of volunteers who meet three times a year to fulfill the mission.
Each year, BSA elects a president, officers, and a board of directors.
(Click here to see the leaders of the association)
S. M. Van Kirk served as BSA's first executive director beginning in 1966. Following Van Kirk's retirement in 1971, Humes & Associates in Chicago, Illinois, became the association management staff. Chuck Whitchurch served as executive director until February 1973, when Richard W. Church took over the position. In 1977, Durward Humes became executive director when Mr. Church left Humes & Associates. In 1985, CM Services, Inc., Glen Ellyn, Illinois, assumed management of BSA.
BSA is run by the professional management staff of CM Services, Inc., The Association Partnership Company®, in Glen Ellyn, Illinois. Dick Church serves as Executive Director, Jerilyn Church serves as Executive Secretary, Jeff Church serves as Managing Director, Sarah Thompson serves as Association Meeting Manager, Catherine Church serves as Association Manager and Tricia Marella serves as Association Project Manager.
The president appoints a convention planning committee, typically consisting of 5-6 couples, including at least one participating manufacturer. This committee meets the day after the preceding convention (sometimes before if necessary) and several times throughout the year, including a site visit to the convention hotel. Based on suggestions from the Member Engagement and Programs Committee, they select the program, social events, and draft a budget. The board approves the budget at the Fall Meeting.
Men - slacks, open neck, banded collar or polo shirts, sweaters, walking shorts, no ties/jackets.
Women - slacks, skirts, blouses, sweaters, walking shorts, open neck banded collar or polo shirts.
Dress code for the evening events, please refer to the Social Events page.
Please wear your badge when attending all Convention sessions and events. Admission to the functions are restricted to those wearing badges.
Please visit the registration area when you arrive on Saturday from 1:00 PM - 4:00 pm at the Verbena Terrace or Sunday from 7:30 am - 11:00 am at the Indian Wells Ballroom. You will receive your badge, a registration list, and information on any important changes to the schedule.
Although Convention food functions are included in the registration fee, some attendees do not register for them in advance, but do attend “unannounced.” BSA must give the hotel a count of event attendees 5 days in advance and is billed for the number guaranteed, even if the number served is less. If registrants attend unannounced, a shortage of food or seats may occur. We are sure you agree that it is in everyone’s best interest not to pay for food not served. Always indicate on your registration all events you plan to attend and while on site, inform staff as soon as possible if you will be unable to attend a function.
Please contact staff who will let you know if space is available.
All events have been guaranteed and deposits paid approximately 3-4 weeks prior to the convention. BSA cannot offer refunds for cancellations received after April 1, 2022.
Please indicate any special needs or food requirements on your registration form or convey this information to staff prior to arrival or when you pick up your registration materials onsite. If you are vegetarian/vegan or other special dietary requirements, you will be issued a Special Meal card which should be placed in your badge holder. Place the card next to your plate at each meal function so that the servers know you need a special meal. Be sure to pick up the card after your meal has been served and place it back in your badge holder so it can be re-used at the next meal function.
Guests may attend certain functions, listed on the schedule, by completing a guest registration form and paying the fee for each function. Please contact saraht@cmservices.com for specific requests. Guests who are not personnel in your company or their spouses, must be registered in order to attend. Guests would be children, caretakers, parents, etc.
BSA was founded in 1966, by the merger of the former Anti-Friction Bearing Distributors Association and the former Association of Bearing Specialists.
THE ANTI-FRICTION BEARING DISTRIBUTORS ASSOCIATION (AFBDA)
Bearing distribution in the industrial aftermarket began before World War I and grew in scope and in number of distributing companies in the two decades between the major wars. It became the broad dynamic industry it is today after World War II.
Joseph M. Bruening can be credited with the idea of forming an industry trade association. As bearing specialists, his company and others had no way to secure deferments for employees who were being drafted during World War II; although bearings were a critical material, bearing distributors had no status with the government. Bruening went to Washington, D.C., to see if and how bearings specialists could protect their staff members. The U.S. War Manpower Commission said that if Bruening wanted recognition and a chance to obtain deferments for employees, the industry needed a voice—a trade association.
Bruening immediately began organizing what was first called the Central States Anti-Friction Bearing Distributors' Committee, which later became AFBDA. A preliminary meeting was held in Cleveland, Ohio, on May 11, 1943. Attending were Ohio Ball Bearing Co., Berry Bearing Co. (Chicago), Indiana Bearings, Inc. (Indianapolis), Neiman Bearing Co. (St. Louis), and Detroit Ball Bearing Co. (Detroit).
On May 12, 1943, Thomas B. Moore—as chairman of the new group—immediately sent a letter to the War Manpower Commission requesting deferment consideration for company employees. It was noted that, from the above companies, 67 persons from a total employment of 230 people were in the armed services, seven were awaiting induction, and 41 were awaiting reclassification. The new AFBDA was recognized in Washington.
AFBDA was officially founded at a second meeting on September 11, 1943. In addition to Bruening, attending distributors included: Roland N. Dames (R-J Bearings Corp., St. Louis), Harold C. Goehrig (Industrial Bearing Corp., Buffalo), C.J.Kostbade (for Les Berry of Berry Bearing), Thomas B. Moore (Detroit Ball), C. H. Neiman (Neiman Bearing), J. D. Pence (Bearing Distributors, Inc., Cleveland), J. F. Raymond (Indiana Bearings), Ray M. Ring (Ray M. Ring Co., now Bearing Headquarters, Inc., Chicago), and O. D. Robbins (Kentucky Bearings Service, Louisville). Representatives of five manufacturers—Fafnir, Marlin-Rockwell, SKF, United Motors, and Timken—also were present.
During the next two decades, AFBDA undertook a variety of trade association activities, including cost-of-doing-business surveys, periodic newsletters and bulletins on current industry problems, and discussions with manufacturers on ways to solve mutual problems. There were also in-house training programs, seminars on sales management and other subjects, and a successful fight with the U.S. government on the dumping of excess bearings. By the mid-1960s, AFBDA had about 50 members.
After World War II, AFBDA met regularly twice a year. The annual business meeting was always held in Chicago. Manufacturers were invited to these meetings, which were held in the fall. A combined business and social meeting was held each spring, in a variety of city and resort locations.
ASSOCIATION OF BEARING SPECIALISTS (ABS)
In December 1951, at the Shamrock Hotel in Houston, a small group of distributors who did not belong to AFBDA founded ABS. This group included Bud L. Behring (Behring's Bearing Service, Houston), William F. Chase (Bearing Service Co., Pittsburgh), J. Hudson Crockett (Standard Machine & Supply Co., Norfolk), George W. Elftman (General Bearings Company, Los Angeles), Jack R. Gelomb (Iowa Bearing Co., Inc., Davenport), Harold Johnson and Frank Stevens (General Bearings, Co., Chicago), Eugene Tappero (Michigan Bearing Co., Detroit), and Joseph K. Weiser (Minnesota Bearing Co., Minneapolis).
A constitution was written. Jack Gelomb was elected president, and Bill Chase, who was the guiding leader throughout ABS's life, was named chairman of the board.
The Board of Directors met at least three times a year during ABS's life to develop plans and review accomplishments. In 1952, the first of the two-day annual meetings was held in Chicago. Typically, the opening day was for distributor members only, and the second day was open to ball and roller bearing manufacturers.
Other projects evolved as ABS matured. In the early years, one special project was undertaken each year. This led to the development of several bearing books; all were needed and previously unavailable publications.
One major thrust was communicating to manufacturers the vital role of specialist companies in bearing distribution and the need for current data about the marketplace. ABS also retained Washington counsel to monitor the impact of imported bearings.
ABS communicated with its members through a monthly magazine, Your Bearing Specialist, and at the annual meetings. It developed a statistical program on the costs of doing business, along with other management tools.
In addition, ABS worked with manufacturers in setting up educational programs and training films for distributor employees. Its Liaison Committee advised manufacturers on sales and technical assistance needs, on improved packaging and cataloging, and on stronger support of the distribution function. Manufacturers, in turn, took part in meetings through presentations and participation on panels.
By the early 1960s, ABS represented about 40 bearing specialists. Jess Raban, an attorney associated with General Bearings Co. in Chicago, served as staff.
THE MERGER
In the early 1960s, there was increasing talk about and pressures for a merger of AFBDA and ABS. Many distributors saw the need for a single, stronger voice. There also was concern about duplication of effort and of operating expense, as well as criticism from manufacturers about the costs of attending two separate meetings.
However, there also was resistance to the merger—each group had its own policies and habits, egos, camaraderie, and pride. Accepting a merger was hard and, for some, emotional. It took two formal meetings, after years of casual discussion and informal contacts, to make BSA a reality.
The first formal meeting took place in Minneapolis in late 1965. A group of key leaders from each association met to seek common ground. Joe Weiser of ABS and Olin Livingston of AFBDA were co-chairmen.
The spirit of cooperation and the desire to merge prevailed. The two groups met in a larger, again formal, and decisive meeting in Las Vegas in February 1966. Following a smaller planning meeting, 12 representatives of each association met in full session.
Following combined board meetings in June in Chicago and in August in Detroit, the new association's first annual convention was held in Chicago in October 1966. This was BSA's only fall annual meeting. The next annual meeting was held the following May in San Francisco; all annual conventions since have been held in the spring.
The BSA Convention offers the best opportunity for the leadership of distributors and manufacturers to grow their relationships and set strategy for mutual business growth. This year, attendance at the convention is a must for all of us, to be able to move forward and rekindle those relationships that have been compromised over the past year.– John Masek, Bearing Service Inc.
I thought assigned seating for Sunday evening was a great idea. The "team" event made it an even better experience!– Jeff Williams, General Bearing Corporation
Great convention. Liked the change in the business program. Speakers were relevant to our industry. Social events were fun.– Jim Fitzpatrick, Bearing Specialty Company
I very much liked the assigned seating, and felt that pushed people to meet each other - as a first time attendee, I liked it very much.– Charles Estermann, Weimer Bearing &Transmission, Inc.
This was the best convention I've attended because of the meeting structure, content, activities and venue.– David Zoesch, Schaeffler Group
It was a beautiful setting, very well run meetings, and some excellent group activities. The camaraderie throughout the organization and the fact that relationships do matter was very apparent.– Scott Eiss, NTN Bearing Corporation of America
The Annual Convention brings together the top leadership of only authorized bearing distributors and manufacturers and offers unparalleled opportunities to grow successful relationships with trusted supply chain partners.